Problem Solver

EPSON PhotoStarter does not work correctly

Windows 98/Windows Me users

Try one or more of these solutions.

Make sure EPSON CardMonitor and EPSON PhotoStarter are installed correctly. Refer to the Setup Guide for installation instructions.

If your selected application does not open automatically when you load a PC card, open the application manually.

Make sure your memory card's capacity is 512 MB or less and only contains data taken with a DCF standard-compliant digital camera. Memory cards that do not meet these specifications are not supported by EPSON CardMonitor and EPSON PhotoStarter.

Check your settings in EPSON PhotoStarter. To find out about changing settings in EPSON PhotoStarter, see Accessing EPSON PhotoStarter.

Windows 98/Windows Me users

Before disconnecting a USB cable while your computer is running, you need to turn off monitoring in CardMonitor. To turn off monitoring, right-click the CardMonitor icon on the taskbar, and select Turn off monitoring. After disconnecting the USB cable, select Resume monitoring.

If your computer seems very slow while CardMonitor is on, try one or both of the following solutions.

Turn off monitoring as described above.

Shut down your computer and disconnect all USB cables while the computer is off. Then, start the computer and reconnect all USB cables while your computer is running.

[Top]