|
Scanning in Office Mode
For Office BX300F/Office TX300F, Office BX600FW/Office TX600F/SX600FW, and Photo PX800FW/Photo TX800FW
When you start Epson Scan for the first time, it runs in Office Mode and displays the Epson Scan Office Mode window.
If you want to scan your documents by placing them on the document table, see Scanning in Office Mode Using the Document Table for instructions.
If you want to scan your documents by loading them in the ADF, see Scanning in Office Mode Using the ADF
for instructions.
Scanning in Office Mode Using the Document Table
For Office BX300F/Office TX300F, Office BX600FW/Office TX600F/SX600FW, and Photo PX800FW/Photo TX800FW
|
Place the original(s) on the document table. See the booklet for instructions.
|
|
Select Color, Grayscale, or Black&White as the Image Type setting.
|
Note:
If you select Grayscale or Black&White, you can also select an Image Option setting, as described below.
|
Image Option Setting
|
Description
|
None
|
No Image Option setting is applied.
|
Color Enhance: Red
|
Enhances red in the scan.
|
Color Enhance: Green
|
Enhances green in the scan.
|
Color Enhance: Blue
|
Enhances blue in the scan.
|
|
Select Auto Detect or Document Table as the Document Source setting.
|
|
Select the size of your original document as the Size setting.
|
|
Click the arrow to open the Resolution list and select an appropriate resolution for your original. See Selecting the Scan Resolution
for instructions.
|
|
Click Scan.
|
What happens next depends on how you started your scan. See Finishing the Scan for instructions.
Scanning in Office Mode Using the ADF
For Office BX300F/Office TX300F, Office BX600FW/Office TX600F/SX600FW, and Photo PX800FW/Photo TX800FW
|
Load the first page of your documents in the ADF. See the booklet for instructions.
|
|
Select Color, Grayscale, or Black&White as the Image Type setting.
|
Note:
If you select Grayscale or Black&White, you can also select an Image Option setting, as described below.
|
Image Option Setting
|
Description
|
None
|
No Image Option setting is applied.
|
Color Enhance: Red
|
Enhances red in the scan.
|
Color Enhance: Green
|
Enhances green in the scan.
|
Color Enhance: Blue
|
Enhances blue in the scan.
|
|
Select one of these settings as the Document Source setting.
|
Auto Detect: This setting automatically determines whether to load your document from the ADF or scan it from the document table.
ADF: Select this setting when you use the ADF to load your documents and scan only one side of your document pages.
|
Select the size of your original document as the Size setting.
|
|
Click the arrow to open the Resolution list and select an appropriate resolution for your original. See Selecting the Scan Resolution
for instructions.
|
|
Click Preview to preview your image(s). The ADF loads your first document page, then Epson Scan prescans it and displays it in the Preview window. The ADF then ejects your first page.
|
|
If necessary, you can draw a marquee (a line marking the scan area) around the portion of your document page that you want to scan in the Preview window. See Creating a Marquee on a Preview Image
for instructions.
|
|
Place your first document page on top of the rest of the pages, then load the entire document (up to 30 pages or a stack thickness of 3 mm [0.1 inch] or less) into the ADF.
|
|
Click Scan.
|
What happens next depends on how you started your scan. See Finishing the Scan for instructions.
If you have problems while scanning using the ADF, see Automatic Document Feeder Problems.
| |