Memory Card Copying Precautions
Compatible Cards and Inserting Positions
Inserting a Memory Card
Copying Photo Files to Your Computer
Saving Photo Files to a Memory Card

Keep the following in mind when copying photos between your memory card and computer:

• Check the documentation that came with your memory card and any adapter you may be using for any handling guidelines.

• Do not eject your memory card or turn off the scanner while the memory card light is flashing or you may lose data.

• Make sure that your memory card is not write-protected. Many memory cards have a write-protect switch or seal.

• Do not copy photos to a memory card while you are printing from the memory card.

• When you are using EPSON File Manager to access photos on your memory card, do not remove the memory card until after you close File Manager.

Top

You can use the following types of cards with your scanner:

Slot	Type of Card
	Compact Flash Microdrive
	Smart Media Memory Stick MagicGate Memory Stick MagicGate Memory Stick Duo* MultiMediaCard Memory Stick PRO Memory Stick Duo* Memory Stick PRO Duo* SD Card miniSD Card* xD-Picture Card xD-Picture Card Type M

* Adapter required.

The scanner supports image files that meet the following requirements:

Top

Make sure the scanner is turned on.

Open the memory card door.

Make sure the memory card light is off and no cards are in any of the slots. Then insert your card into the correct slot. For details, see Compatible Cards and Inserting Positions.

The memory card light flashes and then stays on.

Close the memory card door.

Caution:

Do not remove the card or turn off the scanner while the memory card light is flashing, or you may lose data on the card. Load only one memory card at a time. Eject your memory card before inserting another one. Always close the memory card slot cover to protect your memory card from static electricity. If you touch the inserted memory card, it may cause the scanner to malfunction. If a digital camera is connected to the scanner, disconnect it before you insert your memory card.

Top

Make sure the scanner is turned on and a memory card is inserted.

Windows XP: Click Start and select My Computer.

Windows 98, Me, or 2000:
Double-click the My Computer icon on your desktop.

Double-click the removable disk icon, then select the folder in which your photo files are saved.

Note:

If you have set a volume label, it is displayed as the drive name. If you have not set the volume label, “removable disk” is displayed as the drive name on Windows XP.

Select the photo files you want to copy and drag them to a folder on your computer’s hard drive.

Top

Before inserting your memory card, make sure the write protect switch or seal is set to allow writing to the memory card.

Note:

After copying a photo to a memory card from a Macintosh computer, an older digital camera not be able to read the memory card.

Make sure the scanner is turned on and a memory card is inserted.

Windows XP: Click Start and select My Computer.

Windows 98, Me, or 2000:
Double-click the My Computer icon on your desktop.

Double-click the removable disk icon, then select the folder in which you want to save your photo files.

Note:

If you have set a volume label, it is displayed as the drive name. If you have not set the volume label, “removable disk” is displayed as the drive name on Windows XP.

Select the folder on your computer’s hard drive that contains the photo files you want to copy. Then select the photo files and drag them to the folder on your memory card.

Note:

The number of photos that is displayed on the scanner does not change when you copy photos to the inserted memory card. Remove and reinsert the memory card to view the true number of photos.

Top