epson

Initializing the Network Interface Settings

If you want to restore the network settings to the factory default settings, follow the instructions below.

Using the LCD panel

Enter the Setup mode.
Select Restore Default Settings.
Select Restore Network Settings or Restore All Settings.
Select Yes to restore the factory default settings.

Using buttons on the control panel

Make sure printer is turned on.
Hold down WiFi for ten seconds.
Both WiFi and are turn off.
Note:
This function does not work during a initial setup.

Using EpsonNet Config

Start EpsonNet Config.
Select your printer name, then click Configuration.
Click Default Settings.
When the Transmission is complete screen appears, click OK.