 |
 |
|
||
 |
||||
Technical Specifications
Printer specifications
|
Paper path
|
Sheet feeder, top entry
|
|
Capacity
|
11 mm (0.4 in.) *1 *2
|
*1 For Legal and User Defined sizes, load one sheet at a time.
*2 Paper with a weight of 64 to 90 g/m² (17 to 24 lb).
Paper
Note:|
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.
Use paper under normal conditions:
Temperature 15 to 25 ˚C (59 to 77 ˚F) Humidity 40 to 60% RH |
Single sheets:
|
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
100 × 148 mm
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
|
|
Paper types
|
Plain paper or special paper distributed by Epson
|
|
Thickness
(for plain paper) |
0.08 to 0.11 mm (0.003 to 0.004 in.)
|
|
Weight
(for plain paper) |
64 g/m² (17 lb) to 90 g/m² (24 lb)
|
Envelopes:
|
Size
|
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
|
|
Paper types
|
Plain paper
|
|
Weight
|
75 g/m² (20 lb) to 90 g/m² (24 lb)
|
Printable area
Highlighted portions show printable area.
Single sheets:
|
Normal
|
Borderless
|
 |
 |
Envelopes:
|
Minimum margin
|
||
|
Media type
|
Single sheets
|
Envelopes
|
|
A
|
3.0 mm (0.12 in.)
|
3.0 mm (0.12 in.)
|
|
B
|
3.0 mm (0.12 in.)
|
5.0 mm (0.20 in.)
|
|
C
|
3.0 mm (0.12 in.)
|
20 mm (0.78 in.)
|
Note:|
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
Scanner specifications
Note:|
Specifications are subject to change without notice.
|
|
Scanner type
|
Flatbed color
|
|
Photoelectric device
|
CIS
|
|
Effective pixels
|
10,200 × 14,040 pixels at 1200 dpi
Scanning area may be restricted if resolution setting is large.
|
|
Maximum document size
|
216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size
|
|
Scanning resolution
|
1200 dpi (main scan)
2400 dpi (sub scan)
|
|
Output resolution
|
50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
|
|
Image data
|
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
|
|
Light source
|
LED
|
Network interface specification
Note:|
The availability of this feature varies by product.
|
|
Wi-Fi
|
Standard:
|
IEEE 802.11b/g/n*1
|
|
Security:
|
WEP (64/128bit)
WPA-PSK(TKIP/AES)*2 |
|
|
Frequency Band:
|
2.4 GHz
|
|
|
Communication Mode:
|
Infrastructure mode,
Ad hoc mode |
*1 Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.
*2 Complies with WPA2 with support for WPA/WPA2 Personal.
Memory card
Note:|
The availability of this feature varies by product.
|
|
Compatible memory cards
|
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
Memory Stick PRO-HG Duo*
Memory Stick Micro*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
SDXC
SDHC
SD
MultiMediaCard
MMCplus
MMCmobile*
MMCmicro*
miniSDHC*
miniSD*
microSDHC*
microSD*
|
|
Media format DCF
|
DCF (Design rule for Camera File system) version 1.0 or 2.0 compliant.
All card types standard version compliant.
|
|
Voltage Requirements
|
3.3 v
Maximum current is 450 mA
|
* Adapter required.
Photo data specifications
|
File format
|
JPEG with the Exif Version 2.3 standard
|
|
Image size
|
80 × 80 pixels to 9200 × 9200 pixels
|
|
Number of files
|
Up to 2000
|
Mechanical
|
SX430W
SX435W
TX430W
570W
|
SX230
TX235
535
|
SX235W
NX230
|
|
|
Dimensions
|
Storage
Width: 390 mm (15.4 inches)
Depth: 300 mm (11.8 inches)
Height: 145 mm (5.7 inches)
|
||
|
Printing*
Width: 390 mm (15.4 inches)
Depth: 528 mm (20.8 inches)
Height: 279 mm (11.0 inches)
|
|||
|
Weight
|
Approx. 4.1 kg (9.0 lb) **
|
Approx. 4.1 kg (9.0 lb) **
|
Approx. 4.1 kg (9.0 lb) **
|
* With the output tray extension extended.
** Without the ink cartridges and the power cord.
Electrical
SX430W/SX435W/TX430W/570W
|
100-240 V Model
|
||
|
Input voltage range
|
90 to 264 V
|
|
|
Rated frequency range
|
50 to 60 Hz
|
|
|
Input frequency range
|
49.5 to 60.5 Hz
|
|
|
Rated current
|
0.5 to 0.3 A
|
|
|
Power consumption
|
Standalone copying
|
Approx. 15 W (ISO/IEC24712)
|
|
Ready mode
|
Approx. 6.5 W
|
|
|
Sleep mode
|
Approx. 3.0 W
|
|
|
Power off
|
Approx. 0.3 W
|
|
SX230/TX235/535
|
100-240 V Model
|
||
|
Input voltage range
|
90 to 264 V
|
|
|
Rated frequency range
|
50 to 60 Hz
|
|
|
Input frequency range
|
49.5 to 60.5 Hz
|
|
|
Rated current
|
0.5 to 0.3 A
|
|
|
Power consumption
|
Standalone copying
|
Approx. 13 W (ISO/IEC24712)
|
|
Ready mode
|
Approx. 5.5 W
|
|
|
Sleep mode
|
Approx. 2.0 W
|
|
|
Power off
|
Approx. 0.3 W
|
|
SX235W/NX230
|
100-240 V Model
|
||
|
Input voltage range
|
90 to 264 V
|
|
|
Rated frequency range
|
50 to 60 Hz
|
|
|
Input frequency range
|
49.5 to 60.5 Hz
|
|
|
Rated current
|
0.5 to 0.3 A
|
|
|
Power consumption
|
Standalone copying
|
Approx. 13 W (ISO/IEC24712)
|
|
Ready mode
|
Approx. 6.0 W
|
|
|
Sleep mode
|
Approx. 3.0 W
|
|
|
Power off
|
Approx. 0.3 W
|
|
Note:|
Check the label on the back of the product for its voltage.
|
Environmental
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F) Storage:
-20 to 40 ˚C (-4 to 104 ˚F) 1 month at 40 ˚C (104 ˚F)
|
|
Humidity
|
Operation:*
20 to 80% RH Storage:* 5 to 85% RH
|
* Without condensation
Standards and approvals
SX235W/NX230/SX430W/SX435W/TX430W/570W
U.S. model:
|
Safety
|
UL60950-1
CAN/CSA-C22.2 No.60950-1 |
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B |
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
European model:
|
Low voltage directive 2006/95/EC
|
EN60950-1
|
|
EMC directive 2004/108/EC
|
EN55022 Class B
EN61000-3-2 EN61000-3-3 EN55024 |
|
R&TTE directive 1999/5/EC
|
EN300 328
EN301 489-1 EN301 489-17 EN60950-1 |
For European users:
We, Seiko Epson Corporation, hereby declare that the equipment Models, C461B and C461D, are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
We, Seiko Epson Corporation, hereby declare that the equipment Models, C461B and C461D, are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, and Malta.
Only indoor operation is permitted in France.
If used outside of own premises, general authorization is required in Italy.
If used outside of own premises, general authorization is required in Italy.
Epson can not accept responsibility for any failure to satisfy the protection requirements resulting a non-recommended modification of the products.
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
Epson hereby declares that the equipment Models, C461B and C461D, are in compliance with the essential requirements and other relevant provisions of AS/NZS4771. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.
SX230/TX235/535
U.S. model:
|
Safety
|
UL60950-1
CAN/CSA-C22.2 No.60950-1 |
|
EMC
|
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B |
European model:
|
Low voltage directive 2006/95/EC
|
EN60950-1
|
|
EMC directive 2004/108/EC
|
EN55022 Class B
EN61000-3-2 EN61000-3-3 EN55024 |
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
Interface
|
Hi-Speed USB (Device class for computers)
|