 |
 |
|
||
 |
||||
Transporting the Printer
If you move the printer some distance, you need to prepare it for transportation in its original box or one of a similar size.
Caution:|
When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak.
Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the printer from printing.
|
 |
Remove all paper from the sheet feeder and make sure the printer is off.
|
 |
Open the document cover, and then open the cartridge cover. Secure the ink cartridge holder with tape, as shown below.
|
Note:|
If the print head is not in the home position on the right, turn on the printer and wait until the print head locks in the home position. Then turn off the printer.
|
 |
Close the cartridge cover, and then close the document cover.
|
 |
Unplug the power cord from the outlet, then disconnect the USB cable from your computer.
|
 |
Close the paper support and the output tray.
|
 |
Repack the printer in the box, using the protective materials that came with it.
|
Keep the printer level as you transport it. After you move it, remove the tape securing the print head. If you notice a decline in print quality, run a cleaning cycle or align the print head. For instructions, see the Printing Guide.