Home
Technical Specifications

Paper
Memory Card Slots
Ink Cartridges
Mechanical
Electrical
Environmental
Standards and Approvals
USB Interface

Paper

Note:

Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.

Single sheets:

Size

A4 210 × 297 mm

10 × 15 cm (4 × 6 in)

13 × 18 cm (5 × 7 in)

A6 105 × 148 mm

A5 148 × 210 mm

B5 182 × 257 mm

9 × 13 cm (3.5 × 5 in)

13 × 20 cm (5 × 8 in)

20 × 25 cm (8 × 10 in)

Letter 8 1/2 × 11 in

Legal 8 1/2 × 14 in

Paper types

Plain bond paper or special paper distributed by Epson

Thickness
(for plain bond paper)

0.08 to 0.11 mm (0.003 to 0.004 inch)

Weight
(for plain bond paper)

64g/m² (17lb) to 90g/m² (24lb)

Envelopes:

Size

# 10 4 1/8 × 9 1/2 in

DL 110 × 220 mm

C6 114 × 162 mm

132 × 220 mm

Paper types

Plain bond paper

Weight

75g/m² (20lb) to 90g/m² (24lb)


Note:
  • Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.

  • Do not load curled or folded paper.

  • Use paper under normal conditions:
    Temperature 15 to 25 ˚C (59 to 77 ˚F)
    Humidity 40 to 60% RH

Printable area

Single sheets and index cards:

Normal

Borderless

Envelopes:

Diagonal lines show printable area.

A:

The minimum top margin is 3.0 mm (0.12").

B-L:

The minimum left margin is 3.0 mm (0.12").
The minimum left margin is 5.0 mm (0.20") for envelopes.

B-R:

The minimum right margin is 3.0 mm (0.12").
The minimum right margin is 5.0 mm (0.20") for envelopes.

C:

The minimum bottom margin is 3.0 mm (0.12") for single sheets and index cards.
The minimum bottom margin is 20 mm (0.79") for envelopes.


Note:

Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.

Top
Memory Card Slots

Compatible memory cards

CompactFlash

SmartMedia*

Memory Stick

Memory Stick PRO

Memory Stick Duo**

Memory Stick PRO Duo**

MagicGate Memory Stick

MagicGate Memory Stick Duo**

Microdrive

SD (Secure Digital) Card

MultiMediaCard

miniSD Card**

xD-Picture Card

xD-Picture Card Type M

Voltage Requirements

3.3 v

Maximum current is 500 mA

* Maximum capacity is 128 MB.

**  Adapter required.

Memory card slot compatibility:

CF Type II card slot

Compatible with CF+ and CompactFlash Specification 1.4 cards

SmartMedia card slot

Compatible with SmartMedia Standard 2003 cards

Memory Stick/MemoryStick PRO card slot

Compatible with Memory Stick Standard version 1.3 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.0 cards

SD/MMC card slot

Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 1.0 cards and MultiMediaCard Standard cards

xD-Picture card Slot

Compatible with xD-Picture Card™ Card Specification Version 1.20 Type M

Top
Ink Cartridges

Color

Yellow, Magenta, Cyan, Black

Cartridge life

Within 6 months of opening the package at 25 ˚C (77 ˚F)

Temperature

Storage:
-20 to 40 ˚C (-4 to 104 ˚F)

1 month at 40 ˚C (104 ˚F)

Freezing:*
-16 ˚C (3.2 ˚F)

* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).


Caution:
  • Epson recommends the use of genuine Epson ink cartridges. Epson warranties do not cover damage to this printer caused by the use of ink cartridges not manufactured by Epson.

  • Do not use an ink cartridge if the date on the package has expired.

  • Do not refill the ink cartridge. This printer calculates the amount of ink remaining using an IC chip on the ink cartridge, so even if the cartridge is refilled, the IC chip will report that it is empty.


Note:

The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and subsequent cartridge sets will last for their full rated life.

Top
Mechanical

Paper path

Sheet feeder, top entry

Sheet feeder capacity

About 100 sheets at 64 g/m2 (17 lb) paper

Dimensions

Storage

Width: 436 mm (17.1 inches)

Depth: 268 mm (10.6 inches)

Height: 172 mm (6.8 inches)

Printing

Width:436 mm (17.1 inches)

Depth: 494 mm (19.4 inches)

Height: 300 mm (11.8 inches)

Weight

5.0 kg (11.0 lb) without the ink cartridges

Top
Electrical

 

100-120 V Model

220-240 V Model

Input voltage range

90 to 132 V

198 to 264V

Rated frequency range

50 to 60 Hz

Input frequency range

49.5 to 60.5 Hz

Rated current

0.4A (Max. 0.7 A)

0.2A (Max. 0.3 A)

Power consumption

Approx. 10 W (ISO10561 Letter Pattern)
Approx. 1.5 W in Sleep mode

Approx. 10 W (ISO10561 Letter Pattern)
Approx. 1.5 W in Sleep mode


Note:

Check the label on the back of the printer for its voltage.

Top
Environmental

Temperature

Operation:
10 to 35 ˚C (50 to 95 ˚F)

Storage:
-20 to 40 ˚C (-4 to 104 ˚F)

1 month at 40 ˚C (104 ˚F)

Humidity

Operation:*
20 to 80% RH

Storage:* 5 to 85% RH

* Without condensation

Top
Standards and Approvals

European model:

Low voltage directive 73/72/EEC

EN 60950

EMC directive 89/336/EEC

EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024

Australian model:

EMC

AS/NZS CISPR22 Class B

Top
USB Interface

Standard

Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1, Universal Serial Bus Mass Storage class Bulk-Only Transport Revision 1.0

Bit rate

480 Mbps (High speed device)

Data encoding

NRZI

Adaptable connector

USB Series B

Recommended cable length

Under 2 meters

Top