Other Information
If you need to transport your printer, carefully prepare and repack it as described below using the original box (or a similar box that the printer fits snugly into) and packing materials. Follow the steps below.
![]() | Warning: |
![]() |
|
![]() | Caution: |
![]() |
|
![]() |
|
![]() | Plug in the printer, then turn on the printer. |
![]() |
Press the ![]() ![]() |
![]() | ![]() | Caution: |
![]() | ![]() |
|
![]() | ![]() | Note: |
![]() | ![]() |
|
![]() | Open the printer cover, then open the cartridge cover. |
![]() | To remove all ink cartridges, pinch the sides of each ink cartridge, then lift each cartridge out of the printer. |
![]() | Close the cartridge cover, then close the printer cover. |
![]() |
Press the ![]() |
![]() | Turn off the printer, then unplug the printer. |
![]() | Disconnect the interface cable from the printer. |
![]() | Remove the paper from the sheet feeder and remove the paper support. |
![]() | Open the printer cover again. Secure the ink cartridge holder to the printer with tape as shown below, then close the printer cover. |
![]() | Raise the output tray. |
![]() | Attach the protective materials to both sides of the printer. |
![]() | Repack the printer and power cord in the original box. |
![]() | Keep the printer level during transport. |
![]() | Be sure to remove the tape from the printer before using it again. |
![]() Previous |
![]() Next |