 |
 |
|
||
 |
||||
Introduction to Using, Loading, and Storing Media
You can achieve good results with most types of plain paper. However, coated papers provide superior printouts because they absorb less ink.
Epson provides special papers that are formulated for the ink used in Epson ink jet printers, and recommends these papers to ensure high-quality results.
When loading special paper distributed by Epson, read the instruction sheets packed with the paper first and keep the following points in mind.
Note:|
Load the paper into the sheet feeder printable side up. The printable side is usually whiter or glossier. See the instruction sheets packed with the paper for more information. Some types of paper have cut corners to help identify the correct loading direction.
If the paper is curled, flatten it or curl it slightly in the opposite direction before loading. Printing on curled paper may cause ink to smear on your printout.
 |
Loading capacities for media
Refer to the table below for the loading capacities of paper and other media.
|
Media Type
|
Loading Capacity*1
|
|
Plain paper *2
|
Up to 100 sheets*3
|
|
Epson Premium Ink Jet Plain Paper *2
Epson Photo Quality Ink Jet Paper
Epson Bright White Ink Jet Paper *2
|
Up to 80 sheets
|
|
Epson Photo Paper
Epson Glossy Photo Paper
Epson Premium Glossy Photo Paper
Epson Premium Semigloss Photo Paper
Epson Matte Paper - Heavyweight
|
1 sheet (A4, 20 × 25 cm, 13 × 18 cm)
Up to 10 sheets (10 × 15 cm)
|
|
Envelope
|
Up to 10 *4
|
*1 Depending on the usage environment (humidity and temperature), paper may not be fed correctly. If more than one sheet is fed at a time or if sheets are not fed correctly, try loading fewer sheets.
*2 The loading capacity for manual 2-sided printing is 30 sheets.
*3 Paper with a weight of 75 g/m² (20 lb).
*4 Envelope with a weight of 75 g/m² (20 lb) to 90 g/m² (24 lb).
Note:|
The availability of paper varies by location.
|
Storing Epson photo paper
Return unused paper to the original package as soon as you finish printing. Epson recommends storing your printouts in a resealable plastic bag. Keep them away from high temperature, humidity, and direct sunlight.