 |
 |
|
||
 |
||||
Indicate the Network Status
LCD panel
When the printer is connected to a network, this icon appears in the upper-right corner or the bottom-left corner of the LCD screen.
The icons in the following table indicate the network status.
|
Icon
|
Status
|
 |
Wired LAN error/searching
|
 |
Connected to a wired LAN
|
 |
Wireless LAN error/searching
|
 |
Connected to a wireless LAN (signal strength: Fair)
|
 |
Connected to a wireless LAN (signal strength: Good)
|
 |
Connected to a wireless LAN (signal strength: Excellent)
|
 |
Establishing an Ad Hoc connection.
|
You can confirm the network status as follows on printers that have a Wi-Fi light.
The LED condition varies depending on the network status.
 |
On
|
Connected to a wireless LAN
|
|
Off
|
Not connected to a wireless LAN
|
|
|
Flashing
|
Setting up a wireless LAN
|
LED lights and buttons
The network communication status is indicated via LEDs on printers that do not have an LCD panel.
|
a:
|
Network status light (orange)
|
|
b:
|
Network status light (green)
|
|
Status
|
Indication
|
|
|
Wireless
|
Wired
|
|
|
Warming up
|
 (orange) (green)Flashing alternately |
|
|
Disconnected
|
 (orange) (green) |
|
|
Connected
|
(orange)  (green) |
(orange) (green) |
|
Connecting to network
|
(orange) (green) |
(orange) (green) |
|
Wireless auto setup in progress
|
(orange) (green) Flashing alternately PIN: Flashing at the same time |
-
|
|
Wireless auto setup completed
|
(orange) (green) *1
|
-
|
|
Wireless auto setup error
|
(orange) (green) |
-
|
|
Wireless auto setup error
(No IP address set) |
(orange) (green) *1
|
-
|
= off, = on, = flashing*1 The Network status light (orange) turns off after five minutes.
|
Network Buttons
|
|
|
Wi-Fi
|
Press and hold for three seconds to make easy wireless LAN settings.
|
|
Press to release an easy wireless LAN setting error.
|
|
 |
Press to print a network status sheet.
|
|
Wi-Fi +
|
While holding down the Wi-Fi button, press and hold the
button for about three seconds to make easy wireless LAN settings in WPS PIN mode. |
|
Press and hold for about 10 seconds to initialize network settings.
|
|
Printing status sheet
To confirm the network connection, print a status sheet using the following procedure.
 |
Load a plain paper into the sheet feeder.
|
 |
Press
to print the status sheet. |