EPSON

Bluetooth Settings

If necessary, use your printer’s LCD screen to select settings for Bluetooth wireless communication. You may need to enter a passkey for your printer or turn on encryption, depending on the settings for the Bluetooth enabled device.
Use the , , , or buttons to change the LCD screen view to find the mode you want to enter.
Enter Setup mode from the Home menu.
Enter Bluetooth Settings mode.
Note:
If the Bluetooth settings on the LCD screen are unavailable, the adapter may not be connected properly. Disconnect the adapter from the printer and reconnect it.
See Connecting and Disconnecting the Bluetooth Photo Print Adapter
Enter your settings.
Change the settings of each item. Refer to the following table for information about Bluetooth settings.
Setting
Choices
Description
Set BT PIN Code
Any four-digit number
(Default = 0000)
This setting allows you to set the four-digit passkey that must be entered into a device before printing if Pairing is selected as the BT Mode or if BT Encryption is On. Depending on the settings you made on your Bluetooth enabled device, you may need to refer to the passkey set in the printer and input it into your device even if the printer does not require encryption.
Set BT Printer ID
printer name number
(Default = 1)
If multiple printers enabled with Bluetooth are in the same communication range, distinguish them by assigning each number from 0 through 9.
To make the Set BT Printer ID take effect, turn the printer off and then back on.
BT Mode
Discoverable
This mode allows devices enabled with Bluetooth to freely discover the printer and print.
Not Discoverable
This mode prevents unknown devices from discovering the printer.
To print in this mode, first search for the printer and save the printer name once in Discoverable mode. After your device has discovered the printer in Discoverable mode once, it will subsequently be able to communicate with and print from it in this mode.
Pairing
This mode requires that the four-digit passkey be entered into a device before it can communicate with and print from the printer.
BT Encryption
On/Off
(Default = Off)
Select On to encrypt communication. Encryption requires that the four-digit passkey be entered into a device before it can communicate with and print from the printer.
BT Device Address
Set at the factory
(Example) 11-11-11-11-11-11
Displays the unique Bluetooth Device Address of the printer.