Your printer’s handle makes it easy to carry short distances. If your printer is going to travel a longer distance, you should pack it carefully to protect it from getting damaged.

Caution:

Keep your print out of the sun and do not leave it in your car or other location where it can get too hot.

If your printer is on, turn it off.

Wait until the LCD screen goes blank, then unplug the power cord from the electrical outlet.

Remove paper from the paper feeder and front cover.

Close the LCD screen.

Close the top cover and front cover.

Disconnect the power cord and any connected USB cable from the back of the printer.

Pack the power cord, AC adapter, paper, spare photo cartridge, and all manuals in the plastic case.

Pack the printer and the travel case in the box that the printer came in.

Caution:

Make sure the photo cartridge is installed before transporting. Do not place the printer on its side or upside down, or ink may leak.

Note:

If your prints do not look as good after the printer has been moved, try aligning the print head. See Aligning the Print Head