|
General
Mechanical
Electrical
Environmental
Interfaces
Standards and Approvals
|
Note: |
|
Specifications are subject to change without notice.
|
|
Scanner type
|
Flatbed color
|
Photoelectric device
|
Color CCD line sensor
|
Effective pixels
|
27,200 × 37,440 pixels at 3200 dpi
|
Document size
|
Reflective: 216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size
Transparent (Perfection V100 Photo only): 35 mm film strip: 6 frames at a time 35 mm slides: up to 4 slides at a time
|
Scanning resolution
|
3200 dpi (main scan) 9600 dpi with Micro Step (sub scan)
|
Output resolution
|
50 to 6400, 9600, and 12800 dpi (50 to 6400 dpi in 1 dpi increments)
|
Scanning speed [Reflective]
|
Approximately 4.0 msec per line at 600 dpi Approximately 14.6 msec per line at 3200 dpi
|
Image data
|
16 bits per pixel per color internal 16 bits per pixel per color external (maximum)
|
Interface
|
One USB 2.0 Hi-speed or USB 1.1 port
|
Light source
|
White cold cathode fluorescent lamp
|
Dimensions
|
Width: 430.0 mm (16.9 inches) Depth: 280.0 mm (11.0 inches) Height: 41.0 mm (1.6 inches)
|
Weight
|
Approx. 2.2 kg (4.9 lb)
|
Dimensions
|
Width: 430.0 mm (16.9 inches) Depth: 280.0 mm (11.0 inches) Height: 57.0 mm (2.2 inches)
|
Weight
|
Approx. 2.6 kg (5.7 lb)
|
|
Note: |
|
Check the label on the AC adapter or on the back of the scanner for voltage information.
|
|
Rated voltage
|
DC 13.5 V
|
Rated input current
|
1.5 A
|
Power consumption
|
Perfection V10:
16 W operating 12 W stand-by mode 3.5 W sleep mode
Perfection V100 Photo:
16 W operating 13 W stand-by mode 3.5 W sleep mode
|
|
100-120 V model
|
220-240 V model
|
AC adapter model
|
A391 UC
| A391 GB A391 VD A391 AS A391 BS A391 KR A391 AR |
Rated input voltage
|
AC 100 to 120 V
|
AC 220 to 240 V
|
Rated input current
|
0.6 A
|
0.4 A
|
Rated input frequency
|
50 to 60 Hz
|
Rated output voltage
|
DC 13.5 V
|
Rated output current
|
1.5 A
|
|
Note: |
|
The AC adapter model varies in certain locations.
|
|
As an ENERGY STAR® Partner, Epson has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
The International ENERGY STAR® Office Equipment Program is a voluntary partnership with the computer and office equipment industry to promote the introduction of energy-efficient personal computers, monitors, printers, fax machines, copiers, scanners, and multifunction devices in an effort to reduce air pollution caused by power generation. Their standards and logos are uniform among participating nations.
Temperature
|
Operating
|
5 to 35 ˚C (41 to 95 ˚F)
|
Storage
|
-25 to 60 ˚C (-13 to 140 ˚F)
|
Humidity
|
Operating
|
10 to 80%, without condensation
|
Storage
|
10 to 85%, without condensation
|
Operating conditions
|
Ordinary office or home conditions. Avoid operating the scanner in direct sunlight, near a strong light source, or in extremely dusty conditions.
|
Interface type
|
Universal Serial Bus Specification Revision 2.0
|
Electrical standard
|
Full Speed mode (12 Mbits per second) and Hi-Speed mode (480 Mbits per second) of Universal Serial Bus Specification Revision 2.0.
|
Connector type
|
One Type B port
|
U.S. model:
EMC
|
FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR 22 Class B
|
European model:
EMC Directive 89/336/EEC
|
EN 55022 Class B EN 55024
|
Australian model:
EMC
|
AS/NZS CISPR22 Class B
|
U.S. model:
Safety
|
UL60950-1 CAN/CSA-C22.2 No. 60950-1
|
EMC
|
FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR22 Class B
|
European model:
Low Voltage Directive 73/23/EEC EMC Directive 89/336/EEC
|
EN 60950-1 EN 55022 Class B
EN 55024 EN 61000-3-2 EN 61000-3-3
|
Australian model:
Safety
|
AS/NZS 60950.1
|
EMC
|
AS/NZS CISPR22 Class B
|
| |