Home
Film or Slide Scanning Problems (Perfection V100 Photo Only)

You Cannot Scan Film or Slides
Negative Film Preview Images Look Strange
Striped Rings Appear in Your Scanned Image
A Line Appears in the Previewed Image

You Cannot Scan Film or Slides
  • Make sure the Document Type setting (Home Mode) or Document Type and Film Type settings (Professional Mode) are set correctly for your film/slide type. See Selecting Basic Settings for instructions.

Top
Negative Film Preview Images Look Strange
  • Make sure the Document Type setting (Home Mode) or Document Type and Film Type settings (Professional Mode) are set correctly for your film. See Selecting Basic Settings for instructions.

  • In full-size preview, the dark area around the film and the frame of the film holder is perceived as white. This alters the exposure and causes images to appear darker. Create marquees on the image area you want to scan as described in Previewing and Adjusting the Scan Area . Then click the Zoom button to preview the area.

Top
Striped Rings Appear in Your Scanned Image

A ring-shaped pattern of stripes (called a Newton ring) sometimes appears on scanned images of transparent materials. It may occur if the film is curled.

Place the film with the base side facing up and preview using thumbnail preview. Then flip the previewed image by clicking the (mirroring) icon in the Preview window. See Previewing and Adjusting the Scan Area for instructions.

Top
A Line Appears in the Previewed Image

The document table or transparency unit window may be dusty or scratched. Clean the document table and transparency unit window as described in Cleaning the Scanner. If you still have the problem, contact your dealer.

Top