Printer Parts and Control Panel Functions

a.

Paper support: Supports the paper loaded in the sheet feeder.

b.

Sheet feeder: Holds your paper and feeds it for printing.

c.

Paper feed roller lever: Push this lever forward to release and remove any jammed paper.

d.

Printer cover: Covers the printing mechanism. Open only to clear paper jams.

e.

Output tray: Holds the ejected paper.

f.

Edge guide: Holds your paper straight in the sheet feeder. Move the edge guide to the edge of your paper.

g.

Ink tank unit: Holds the ink tanks. Hook the unit onto the printer during use.

a.

USB connector: Connects the USB cable from your computer to the printer.

a.

Control panel: Use the buttons and monitor the lights to control your printer. See the next section for details.

b.

Print head: Prints ink on your paper.

c.

Ink tanks: Hold the ink.

d.

Ink tubes: Deliver ink from the ink tanks to the print head.

e.

Transportation lock: Locks the ink tubes for transporting.

power

Press to turn the printer on and off.

stop/maintenance

Press to load or eject paper.

Press to resume printing after a paper out error or multiple page feed error.

Press to cancel printing during a print job.

Press to return the print head to its home position.

When the  error light is off, press and hold for 3 seconds to clean the print head.

power

On when the printer is on.

Flashes when the printer is receiving data, printing, or cleaning the print head.

error

On when the ink level of one or more ink tanks may have reached the lower line.

Flashes when the ink level of one or more ink tanks may be low. You may continue printing until the ink level reaches the lower line.