 |
 |
|
||
 |
||||
Transporting Your Printer
If you need to transport your printer some distance, carefully prepare and repack it as described below. Use the original box and packing materials, or a similar box that holds the printer snugly.
Caution:|
When storing or transporting the printer, do not tilt it, stand it up vertically, or turn it upside down. Otherwise, ink may leak inside the printer.
|
 |
Plug in the printer and turn it on. Wait until the print head returns to the home position.
|
 |
Turn off the printer and unplug its power cord.
|
 |
Disconnect the interface cable.
|
 |
Remove all paper from the sheet feeder.
|
 |
Open the printer cover. Secure the print head with tape as shown below.
|
Caution:|
When opening the printer cover, make sure that the printer cover support slots securely into the stopper.
|
 |
Close the printer cover.
|
Caution:|
Be careful not to trap your fingers when closing the printer cover.
|
 |
Close the output tray and paper support.
|
 |
Attach the protective materials to both sides of the printer.
|
 |
Repack the printer and power cord in the original box.
|
Note:|
Keep the printer level during transport.
Be sure to remove the protective materials and tape from the printer before using it again.
|