Memory card copying precautions
Supported memory cards
Inserting a memory card
Removing the memory card

Keep the following in mind when copying files between your memory card and computer:

• Check the documentation that came with your memory card and any adapter you may be using for any handling guidelines.

• Do not eject your memory card or turn off the printer while the memory card light is flashing or you may lose data.

• Make sure that your memory card is not write-protected. Many memory cards have a write-protect switch.

• Do not copy files to a memory card while you are printing from the memory card.

• The printer display does not update information about your memory card after you copy files to it or delete files from it. To update the information displayed, wait until the memory card light stops flashing, then eject and reload the memory card.

• When you are using EPSON File Manager to access photos on your memory card, do not remove the memory card until after you close File Manager.

Top

You can use the following types of memory cards with your printer:

* Adapter required.

Note:

See the following for the specifications of memory cards that can be used with the printer. Memory card slots

Top

Turn on the printer.

Open the memory card slot cover.

Make sure no cards are in any of the slots. Then insert your memory card as shown in the illustrations below.

Slot	Type of Card
	Compact Flash Microdrive
	xD-Picture Card xD-Picture Card Type M xD-Picture Card Type H
	SD Memory Card SDHC Memory Card MultiMedia Card miniSD card* miniSDHC card* microSD card* microSDHC card*
	Memory Stick Memory Stick PRO MagicGate Memory Stick Memory Stick Duo* Memory Stick PRO Duo* MagicGate Memory Stick Duo*
	SmartMedia

*Adopter required.

The memory card light flashes and then stays on. Then close the memory card slot cover.

Caution:

Load your memory card only as shown above or you may damage your printer, memory card, or both. If you insert a card incorrectly, you see an error message on your screen. Click Cancel, then remove the memory card and insert it correctly. Load only one memory card at a time. Eject your memory card before inserting another one. Always close the memory card slot cover to protect your memory card from static electricity. If you touch the inserted memory card, it may cause the printer to malfunction. If a digital camera is connected to the printer, disconnect it before you insert your memory card. Make sure you check which direction the card should be inserted, and if the card needs an adapter make sure you attach the adapter before inserting the card. Otherwise, you may not be able to remove the card from the product.

Top

Caution:

On a Macintosh, always drag the memory card icon on the desktop into the trash to eject the card before you turn off the printer or unplug the USB cable. Otherwise, you may lose data from the memory card.

Make sure the memory card light is not flashing.

Pull the memory card out of its slot.

Caution:

Do not remove a memory card when the memory card light is flashing or you may lose data from the memory card.

Top