|
Paper
Memory card slots
Ink cartridges
Mechanical
Electrical
Environmental
Standards and approvals
Interface
|
Note: |
Single sheets:
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
16:9 wide size (102 × 181 mm)
|
Paper types
|
Plain bond paper or special paper distributed by Epson
|
Thickness (for plain bond paper)
|
0.08 to 0.13 mm (0.003 to 0.005 in.)
|
Weight (for plain bond paper)
|
64 g/m2 (17 lb) to 90 g/m2 (24 lb)
|
Envelopes:
Size
|
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
|
Paper types
|
Plain bond paper
|
Weight
|
75 g/m2 (20 lb) to 90 g/m2 (24 lb)
|
Diagonal lines show printable area.
Single sheets:
Normal
|
Borderless
|
|
|
Envelopes:
A:
|
The minimum top margin is 3.0 mm (0.12").
|
B-L:
|
The minimum left margin is 3.0 mm (0.12").
|
The minimum left margin is 5.0 mm (0.20") for envelopes.
|
B-R:
|
The minimum right margin is 3.0 mm (0.12").
|
The minimum right margin is 5.0 mm (0.20") for envelopes.
|
C:
|
The minimum bottom margin is 3.0 mm (0.12") for single sheets.
|
D:
|
The minimum bottom margin is 20 mm (0.78") for envelopes.
|
|
Note: |
|
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
|
Compatible memory cards
|
CompactFlash
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
Microdrive
SD Memory Card
SDHC Memory Card
MultiMediaCard
miniSD card*
miniSDHC card*
microSD card*
microSDHC card*
xD-Picture Card
xD Picture Card Type M
xD Picture Card Type H
|
Voltage Requirements
|
3.3 v
Maximum current is 500 mA
|
* Adapter required.
Memory card slot compatibility:
CF Type II card slot
|
Compatible with CF+ and CompactFlash Specification 3.0 cards
|
Memory Stick/MemoryStick PRO card slot
|
Compatible with Memory Stick Standard version 1.42-00 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.02-00 cards
|
SD/MMC card slot
|
Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.00 cards and MultiMediaCard Standard version 4.1 cards
|
xD-Picture card slot
|
Compatible with xD-Picture Cards. Card Specification Version 1.20 Type M and Type H cards.
|
Color
|
Yellow, Magenta, Cyan, Black
|
Cartridge life
|
Within 6 months of opening the package at 25 ˚C (77 ˚F)
|
Temperature
|
Storage: -20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:* -16 ˚C (3.2 ˚F)
|
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
|
Caution: |
|
-
Epson recommends the use of genuine Epson ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
-
Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
|
|
Paper path
|
Sheet feeder, top entry
|
Sheet feeder capacity
|
About 100 sheets at 64 g/m2 (17 lb) paper
|
Dimensions
|
Storage
Width: 430mm (16.9 inches)
Depth: 354 mm (13.9 inches)
Height: 181mm (7.1 inches)
|
Printing
Width: 430mm (16.9 inches)
Depth: 491 mm (19.3 inches)
Height: 284 mm (11.2 inches)
|
Weight
|
Approx. 6.5kg (14.3lb) without the ink cartridges
|
|
100-120 V Model
|
220-240 V Model
|
Input voltage range
|
AC 90 to 132 V
|
AC 198 to 264 V
|
Rated frequency range
|
50 to 60 Hz
|
Input frequency range
|
49.5 to 60.5 Hz
|
Rated current
|
0.4 A (Max 0.7 A)
|
0.2 A (Max 0.4 A)
|
Power consumption
|
Copying
|
Approx. 13 W (ISO/IEC10561 Letter Pattern)
|
Approx. 13 W (ISO/IEC10561 Letter Pattern)
|
Low power mode
|
Approx. 4.0 W
|
Approx. 4.0 W
|
Sleep mode
|
Approx. 3.5 W
|
Approx. 3.5 W
|
Power off mode
|
Approx. 0.2 W
|
Approx. 0.3 W
|
|
Note: |
|
Check the label on the back of the printer for its voltage.
|
|
Temperature
|
Operation: 10 to 35 ˚C (50 to 95 ˚F)
Storage: -20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
|
Humidity
|
Operation:* 20 to 80% RH
Storage:* 5 to 85% RH
|
* Without condensation
U.S. model:
Safety
|
UL 60950-1 CSA C22.2 No.60950-1
|
EMC
|
FCC Part 15 Subpart B Class B CAN/CSA-CEI/IEC CISPR 22 Class B
|
European model:
Low voltage directive 73/72/EEC
|
EN 60950-1
|
EMC directive 89/336/EEC
|
EN55022 Class B EN61000-3-2 EN61000-3-3 EN55024
|
USB 2.0 Hi-Speed (Device Class for computers)
|
USB 2.0 Hi-Speed (Mass Storage Class for external storage devices)
|
| |