Using the Nozzle Check utility for Windows
Using the printer buttons

If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles.

You can check the print head nozzles from your computer by using the Nozzle Check utility or from the printer by using the buttons.

Follow the steps below to use the Nozzle Check utility.

Make sure that A4 size paper is loaded in the sheet feeder.

Access the printer driver.

Accessing the printer driver for Windows

Click the Maintenance tab, then click the Nozzle Check button.

Follow the on-screen instructions.

Top

Follow the steps below to check the print head nozzles using the printer buttons.

Make sure that A4 paper is loaded in the sheet feeder.

Make sure that this printer is off.

Press the On button while pressing the Ink button and hold them down for about 3 seconds. This printer turns on and starts printing the test pattern.

Below are two sample nozzle check patterns.

Compare the quality of the printed check page with the sample shown below. If there are no print quality problems, such as gaps or missing segments in the test lines, the print head is fine.

If any segment of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or a misaligned print head.

Top