|
Technical Specifications
Paper
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.
Use paper under normal conditions: Temperature 15 to 25 ˚C (59 to 77 ˚F) Humidity 40 to 60% RH
|
Single sheets:
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
|
Paper types
|
Plain bond paper or special paper distributed by Epson
|
Thickness (for plain bond paper)
|
0.08 to 0.11 mm (0.003 to 0.004 in.)
|
Weight (for plain bond paper)
|
64 g/m² (17 lb) to 90 g/m² (24 lb)
|
Envelopes:
Size
|
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
|
Paper types
|
Plain bond paper
|
Weight
|
75 g/m² (20 lb) to 90 g/m² (24 lb)
|
Printable area
Diagonal lines show printable area.
Single sheets and index cards:
Envelopes:
|
Minimum margin
|
Media type
|
Single sheets and index cards
|
Envelopes
|
A
|
3.0 mm (0.12 in.)
|
3.0 mm (0.12 in.)
|
B-L, B-R
|
3.0 mm (0.12 in.)
|
5.0 mm (0.20 in.)
|
C
|
3.0 mm (0.12 in.)
|
20 mm (0.78 in.)
|
Note:
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
Ink cartridges
Color
|
Yellow, Magenta, Cyan, Black
|
Cartridge life
|
Use within 6 months of opening the package.
|
Temperature
|
Storage: -20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:* -16 ˚C (3.2 ˚F)
|
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
Caution:
Epson recommends the use of genuine Epson ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
Do not use an ink cartridge if the date on the package has expired.
Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.
|
Note:
The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and therefore these cartridges print fewer pages compared to subsequent ink cartridges.
Yields vary considerably based on images printed, print settings, paper type, frequency of use and temperature.
For print quality, an unspecified amount of ink remains in the cartridge even after the indicator asking you to replace the cartridge comes on.
|
Mechanical
Paper path
|
Sheet feeder, top entry
|
Sheet feeder capacity
|
About 80 sheets at 90 g/m² (24 lb) paper
|
Dimensions
|
Storage
Width: 435 mm (17.1 inches)
Depth: 219 mm (8.6 inches)
Height: 165 mm (6.5 inches)
|
Printing
Width: 435 mm (17.1 inches)
Depth: 418 mm (16.5 inches)
Height: 289 mm (11.4 inches)
|
Weight
|
Approx. 2.8 kg (6.16 lb) without the ink cartridges
|
Electrical
|
100-120 V Model
|
220-240 V Model
|
Input voltage range
|
100 to 120 V
|
220 to 240 V
|
Rated frequency range
|
50 to 60 Hz
|
Input frequency range
|
49.5 to 60.5 Hz
|
Rated current
|
0.4A
|
0.2A
|
Power consumption
|
ISO10561 Letter Pattern
|
Approx. 11 W
|
Approx. 11 W
|
Sleep mode
|
Approx. 2.5 W
|
Approx. 3.0 W
|
Power off mode
|
Approx. 0.2 W
|
Approx. 0.4 W
|
Note:
Check the label on the back of the printer for its voltage.
|
Environmental
Temperature
|
Operation: 10 to 35 ˚C (50 to 95 ˚F)
Storage: -20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
|
Humidity
|
Operation:* 20 to 80% RH
Storage:* 5 to 85% RH
|
* Without condensation
Standards and approvals
European model:
Low voltage directive 73/23/EEC
|
EN 60950-1
|
EMC directive 89/336/EEC
|
EN55022 Class B EN61000-3-2 EN61000-3-3 EN55024
|
Australian model:
EMC
|
AS/NZS CISPR22 Class B
|
Interface
USB 1.1 (Device Class for computers)
|
| |