Paper Does Not Feed Correctly

You have inserted the paper cassette all the way into the printer.

The paper is not curled or creased.

The paper is not too old. See the instructions that came with the paper for more information.

Load paper into the appropriate paper cassette.

You have selected the correct paper source in the application or printer driver settings.
See Selecting which cassette to use and its loading capacities

For plain paper, do not load paper above the  arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
See Selecting which cassette to use and its loading capacities

Paper is not jammed inside the printer. If it is, remove the jammed paper.
See The Paper Jams

The ink cartridges are not expended. If a cartridge is expended, replace it.
See Replacing an Ink Cartridge

You have followed any special loading instructions that came with your paper. Load the paper again.
See Loading Paper

The paper does not have any binder holes.

For plain paper, do not load paper above the  arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
See Selecting which cassette to use and its loading capacities

Make sure the edge guides are snug against the edges of the paper.

Make sure the paper is not curled or folded. If so, flatten it or curl it slightly toward the opposite side before loading.

Remove the stack of paper and make sure that the paper is not too thin.
For details on paper thickness, click the Appendix tab in the upper right corner of the User’s Guide window. Then click Product Information and Technical Specifications.

Fan the edges of the stack to separate the sheets, then reload the paper.

If too many copies of a file are being printed, check the Copies setting in your printer driver as follows, and also check in your application.
For Windows, check the Copies setting on the Main window.
For Mac OS X 10.4, check the Copies setting in the Copies & Pages setting in the Print dialog box.
For Mac OS X 10.5 or later, check the Copies setting in the Print dialog box.

If the paper does not eject fully, press  Start to eject the paper. If the paper is jammed inside the printer, remove it by referring to the following section.
See The Paper Jams

If the paper is wrinkled when it comes out, it may be damp or too thin. Load a new stack of paper.