 |
 |
|
||
|
||||
 |
||||
Monitoring the Network Status
The network communication status is indicated via LEDs on printers that do not have an LCD panel.
LED lights and buttons
|
a:
|
Network status light (orange)
|
|
b:
|
Network status light (green)
|
|
Status
|
Indication
|
|
|
Wireless
|
Wired
|
|
|
Warming up
|
 (orange) (green)Flashing alternately |
|
|
Disconnected
|
 (orange) (green) |
|
|
Connected
|
(orange)  (green) |
(orange) (green) |
|
Connecting to network
|
(orange) (green) |
(orange) (green) |
|
Wireless auto setup in progress
|
(orange) (green) Flashing alternately PIN: Flashing at the same time |
-
|
|
Wireless auto setup completed
|
(orange) (green) *1
|
-
|
|
Wireless auto setup error
|
(orange) (green) |
-
|
|
Wireless auto setup error
(No IP address set) |
(orange) (green) *1
|
-
|
= off, = on, = flashing*1 The Network status light (orange) turns off after five minutes.
|
Network Buttons
|
|
|
WiFi
|
Press and hold for three seconds to make easy wireless LAN settings.
|
|
Press to release an easy wireless LAN setting error.
|
|
|
Press and hold for about 10 seconds to initialize network settings.
|
|
 |
Press to print a network status sheet.
|
|
WiFi +
|
While holding down the WiFi button, press and hold the
button for about three seconds to make easy wireless LAN settings in WPS PIN mode. |
Printing status sheet
To confirm the network connection, print a status sheet using the following procedure.
 |
Load a plain paper into the sheet feeder.
|
 |
Press
to print the status sheet. |
|
|||||||||||||
| |||||||||||||
 (NPD3725N-00 EN) |
