 |
 Paper
Ink Cartridges
Mechanical
Electrical
Environmental
Standards and Approvals
USB Interface
 |
Note: |
|
|
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
|
|
Single sheets:
|
Size
|
A4 210 × 297 mm
10 × 15 cm (4 × 6 in)
13 × 18 cm (5 × 7 in)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in)
13 × 20 cm (5 × 8 in)
20 × 25 cm (8 × 10 in)
Letter 8 1/2 × 11 in
Legal 8 1/2 × 14 in
|
|
Paper types
|
Plain bond paper or special paper distributed by Epson
|
|
Thickness
(for plain bond paper)
|
0.08 to 0.11 mm (0.003 to 0.004 inch)
|
|
Weight
(for plain bond paper)
|
64g/m² (17lb) to 90g/m² (24lb)
|
Envelopes:
|
Size
|
Envelope #10 4 1/8 × 9 1/2 in
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
Envelope 132 × 220 mm
|
|
Paper types
|
Plain bond paper
|
|
Weight
|
75g/m² (20lb) to 90g/m² (24lb)
|
|
Note: |
Single sheets and index cards:
|
Normal
|
Borderless
|
|
|
|
Envelopes:
|
Diagonal lines show printable area.
|
|
A:
|
The minimum top margin is 3.0 mm (0.12").
|
|
B-L:
|
The minimum left margin is 3.0 mm (0.12") for single sheets and index cards.
The minimum left margin is 5.0 mm (0.20") for envelopes.
|
|
B-R:
|
The minimum right margin is 3.0 mm (0.12") for single sheets and index cards.
The minimum right margin is 5.0 mm (0.20") for envelopes.
|
|
C:
|
The minimum bottom margin is 3.0 mm (0.12") for single sheets and index cards.
|
|
D:
|
The minimum bottom margin is 20 mm (0.78") for envelopes.
|
|
Note: |
|
|
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.
|
|
|
Color
|
Yellow, Magenta, Cyan, Black
|
|
Cartridge life
|
Within 6 months of opening the package at 25 ˚C (77 ˚F)
|
|
Temperature
|
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:*
-16 ˚C (3.2 ˚F)
|
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
 |
Caution: |
|
-
Do not refill the ink cartridge. This printer calculates the amount of ink remaining using an IC chip on the ink cartridge, so even if the cartridge is refilled, the IC chip will report that it is empty.
|
|
|
Note: |
|
|
The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and subsequent cartridge sets will last for their full rated life.
|
|
|
Paper path
|
Sheet feeder, top entry
|
|
Sheet feeder capacity
|
About 120 sheets at 90 g/m² (24 lb) paper
|
|
Dimensions
|
Storage
Width: 447 mm (17.6 inches)
Depth: 240 mm (9.4 inches)
Height: 195 mm (7.7 inches)
|
|
Printing
Width: 447 mm (17.6 inches)
Depth: 436 mm (17.1 inches)
Height: 314 mm (12.4 inches)
|
|
Weight
|
4 kg (8.8 lb) without the ink cartridges
|
|
|
100-120V Model
|
220-240V Model
|
|
Input voltage range
|
90 to 132 V
|
198 to 264 V
|
|
Rated frequency range
|
50 to 60 Hz
|
|
Input frequency range
|
49.5 to 60.5 Hz
|
|
Rated current
|
0.4A (Max. 0.7A)
|
0.2A (Max. 0.4A)
|
|
Power consumption
|
Approx. 11 W (ISO10561 Letter Pattern)
Approx. 2.0 W in Sleep Mode
Approx. 0.3W in Power Off Mode
|
Approx. 11 W (ISO10561 Letter Pattern)
Approx. 2.5 W in Sleep Mode
Approx. 0.4W in Power Off Mode
|
|
Note: |
|
|
Check the label on the back of the printer for its voltage.
|
|
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 60 ˚C (-4 to 140 ˚F)
1 month at 40 ˚C (104 ˚F)
|
|
Humidity
|
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
|
* Without condensation
U.S. model:
|
Safety
|
UL 60950-1
CSA No.60950-1
|
|
EMC
|
FCC part 15 subpart B class B
CSA C108.8 class B
|
European model:
|
Low Voltage Directive 73/23/EEC
|
EN 60950-1
|
|
EMC Directive 89/336/EEC
|
EN 55022 class B
EN 55024
EN 61000-3-2
EN 61000-3-3
|
Australian model:
|
EMC
|
AS/NZS CISPR 22 Class B
|
|
Standard
|
Based on Universal Serial Bus Specifications Revision 1.1, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1
|
|
Bit rate
|
12 Mbps (Full speed device)
|
|
Data encoding
|
NRZI
|
|
Adaptable connector
|
USB Series B
|
|
Recommended cable length
|
Under 2 meters
|
| |
Top