How should I do to transport the EPSON Stylus Scan 2500?
For short moves, you can just pick up the EPSON Stylus Scan 2500 by the handles on the side and set it down. For longer moves however you need to pack it into a box and lock the scanner carriage transportation lock.

To prevent any damage to your Stylus scan during transportation please do the following:

1. Turn on the EPSON Stylus Scan and wait until the print head locks in position. Then turn off the EPSON Stylus Scan.
2. Unplug the power cord, and then disconnect the interface cable.
3. Open the document and maintenance covers.
4. Push the transportation lock right (as you are facing the printer) to lock the scanner carriage.
5. Close the maintenance and document covers.
6. Remove all paper from the sheet feeder, and then remove the paper support.
7. Push in the output tray extension. Please note: To avoid damage, always leave the ink cartridges installed when transporting the EPSON Stylus Scan. Push in the output tray extension. Tape the print head to the right side from the front of the printer.
8. Use tape to secure the document cover.
9. Use a box and packing materials to pack the EPSON
10. Keep the EPSON Stylus Scan level during transport.

Caution: Be sure to remove the tape used in step 8 before printing.

Article: KB020021 Language: English Product Range: Multifunction

Save as PDF