How do I setup the LQ-580?

How can I select different languages?
How can I change the paper length?
How can I switch the line feed on / off?

Instructions

Follow the steps below to select different languages:

1. Enter Default Setting mode.
2. Select language for “Usage of this mode” by Font button.
Font LEDs show the language for “Usage of this mode” that is currently selected.
This section will be advanced one by one as the button is pressed and the On/Off/Blink/2-Blink of those three LEDs will also be changed according to the selection.
3. Press the Tear Off / Bin button.
The current setting and the “Usage of this mode” by selected language will be printed on the paper set in the paper path at that time.
4. Select Menu by Font button.
Font LEDs show the menu, which is selected at that time. The selection will be advanced one by one as button is pressed.
5. Select setting value by Tear Off / Bin button.
Tear Off / Bin LEDs and Paper Out LED show that menu’s value by status of On/Off/Blink/2-Blinks. That value can be changed by pressing Tear Off / Bin button.
6. When Tear Off / Bin button is pressed, the printer memorize the last setting value.
7. Turn the printer off.
The setting is stored into non-volatile memory.

The other item can be changed in the same manner.
The menu selection will return to the first menu after the last menu selection is over.

Article: KB020075 Language: English Product Range: Dot Matrix