Home
Technical Specifications

Paper
Memory card slots
Ink cartridges
Mechanical
Electrical
Environmental
Standards and approvals
Interface

Paper

Note:
  • Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.

  • Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.

  • Use paper under normal conditions:
    Temperature 15 to 25 ˚C (59 to 77 ˚F)
    Humidity 40 to 60% RH

Single sheets:

Size

A4 210 × 297 mm

10 × 15 cm (4 × 6 in.)

13 × 18 cm (5 × 7 in.)

A6 105 × 148 mm

A5 148 × 210 mm

B5 182 × 257 mm

9 × 13 cm (3.5 × 5 in.)

13 × 20 cm (5 × 8 in.)

20 × 25 cm (8 × 10 in.)

16:9 wide size (102 × 181 mm)

100 × 148 mm

Letter 8 1/2 × 11 in.

Legal 8 1/2 × 14 in.

Paper types

Plain bond paper or special paper distributed by Epson

Thickness
(for plain bond paper)

0.08 to 0.11 mm (0.003 to 0.004 in.)

Weight
(for plain bond paper)

64 g/m² (17 lb) to 90 g/m² (24 lb)

Envelopes:

Size

Envelope #10 4 1/8 × 9 1/2 in.

Envelope DL 110 × 220 mm

Envelope C6 114 × 162 mm

Paper types

Plain bond paper

Weight

75 g/m² (20 lb) to 90 g/m² (24 lb)

Printable area

Diagonal lines show printable area.

Single sheets and index cards:

Normal

Borderless

Envelopes:

A:

The minimum top margin is 3.0 mm (0.12").

B-L:

The minimum left margin is 3.0 mm (0.12") for single sheets and index cards.

The minimum left margin is 5.0 mm (0.20") for envelopes.

B-R:

The minimum right margin is 3.0 mm (0.12") for single sheets and index cards.

The minimum right margin is 5.0 mm (0.20") for envelopes.

C:

The minimum bottom margin is 3.0 mm (0.12") for single sheets and index cards.

D:

The minimum bottom margin is 20 mm (0.78") for envelopes.


Note:

Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.

CD/DVD:

12-cm CD/DVD

8-cm CD/DVD


Note:

If you are printing in the following areas of the disc, the disc or the CD/DVD tray may get stained with ink.

Inner hub area

18 to 42 mm

Outer periphery area

117 to 120 mm (12-cm CD/DVD), 77 to 80 mm (8-cm CD/DVD)

Top
Memory card slots

Compatible memory cards

CompactFlash

Memory Stick

Memory Stick PRO

Memory Stick Duo*

Memory Stick PRO Duo*

MagicGate Memory Stick

MagicGate Memory Stick Duo*

Microdrive

MultiMediaCard

SD Memory Card

miniSD card*

microSD card*

SDHC Memory Card

miniSDHC card*

microSDHC card*

xD-Picture Card

xD Picture Card Type M

xD-Picture Card Type H

Voltage Requirements

3.3 v

Maximum current is 500 mA

* Adapter required.

Memory card slot compatibility:

CF Type II card slot

Compatible with CF+ and CompactFlash Specification 3.0 cards

Memory Stick/Memory Stick PRO card slot

Compatible with Memory Stick Standard version 1.42-00 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.02-00 cards

SD/MMC card slot

Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0 cards and MultiMediaCard System Specification Version 4.1 cards

xD-Picture card Slot

Compatible with xD-Picture card™ Card Specification Version 1.20 Type M and Type H cards

Top
Ink cartridges

Color

Yellow, Magenta, Cyan, Black, Light Magenta, Light Cyan

Cartridge life

Use within 6 months of opening the package.

Temperature

Storage:
-20 to 40 ˚C (-4 to 104 ˚F)

1 month at 40 ˚C (104 ˚F)

Freezing:*
-16 ˚C (3.2 ˚F)

* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).


Caution:
  • Epson recommends the use of genuine Epson ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.

  • Do not use an ink cartridge if the date on the package has expired.

  • Do not refill the ink cartridge. Other products not manufactured by Epson may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.


Note:
  • The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and subsequent cartridge sets will last for their full rated life.

  • Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the frequency of your prints and environmental conditions such as temperature.

  • To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates to replace the cartridge. The yields quoted for you do not include this reserve.

Top
Mechanical

Paper path

Sheet feeder, top entry

Sheet feeder capacity

About 120 sheets at 90 g/m² (24 lb) paper

Dimensions

Storage

Width: 453 mm (17.8 inches)

Depth: 343 mm (13.5 inches)

Height: 194 mm (7.6 inches)

Printing

Width: 453 mm (17.8 inches)

Depth: 538 mm (21.2 inches)

Height: 285 mm (11.2 inches)

Weight

Approx. 7.15 kg (15.8 lb) without the ink cartridges

Top
Electrical

 

100-120 V Model

220-240 V Model

Input voltage range

90 to 132 V

198 to 264 V

Rated frequency range

50 to 60 Hz

Input frequency range

49.5 to 60.5 Hz

Rated current

0.6 A (Max. 1.1 A)

0.3 A (Max. 0.5 A)

Power consumption

Printing

Approx. 17 W (ISO/IEC10561 Letter Pattern, Plain Paper - A4)

Approx. 17 W (ISO/IEC10561 Letter Pattern, Plain Paper - A4)

Sleep mode

Approx. 4.5 W

Approx. 5.0 W

Power off mode

Approx. 0.2 W

Approx. 0.4 W


Note:

Check the label on the back of the printer for its voltage.

Top
Environmental

Temperature

Operation:
10 to 35 ˚C (50 to 95 ˚F)

Storage:
-20 to 40 ˚C (-4 to 104 ˚F)

1 month at 40 ˚C (104 ˚F)

Humidity

Operation:*
20 to 80% RH

Storage:* 5 to 85% RH

* Without condensation

Top
Standards and approvals

U.S. model:

Safety

UL 60950-1
CSA 22.2 No.60950-1

EMC

FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B

European model:

Low voltage directive 73/72/EEC

EN 60950-1

EMC directive 89/336/EEC

EN 55022 (CISPR Pub.22) Class B
EN 61000-3-2
EN 61000-3-3
EN 55024

Australian model:

EMC

AS/NZS CISPR22 Class B

Top
Interface

USB 2.0 Hi-Speed (Device Class for computers)

USB 2.0 Hi-Speed (Mass Storage Class for external storage devices)

Bluetooth Ver.2.0+EDR (Option)

IrDA Ver. 1.3

Top