![](files/01.gif) |
To keep your scanner operating at its best, clean it periodically using the following procedure.
![](files/step_1.gif) |
Unplug the scanner’s AC adapter to turn it off.
|
![](files/step_2.gif) |
Unplug the AC adapter cord from the scanner.
|
![](files/step_3.gif) |
Clean the outer case with a cloth dampened with mild detergent and water.
|
![](files/step_4.gif) |
If the glass surface of the document table gets dirty, clean it with a soft dry cloth. If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid.
|
![](files/step_5.gif) |
For Perfection V100 Photo, remove the document mat and clean the transparency unit window as described in step 3.
|
Make sure that no dust builds up on the surface of the document table or the transparency unit window. Dust can cause spots in your scanned images.
![](files/mark_ca.gif) |
Caution: |
| ![](files/01.gif) |