If an error occurs, the scanner stops operating and the Start light flashes red. This indicates one of the following problems:
The scanner is not connected to your computer properly or your software is not fully installed. See the Start Here sheet that came with your scanner for instructions on installing the scanner software and connecting the scanner to your computer.
The transportation lock is locked. Slide the lock to the unlock position.
The scanner cover cable or optional Multi Photo Feeder cable is not connected to the scanner’s OPTION port. Connect the cable to the port.
On the Perfection 3590 Photo, film may have jammed in the auto film loader. See Film Jams in the Auto Film Loader to remove the jam.
After trying these solutions, unplug the scanner to turn it off, then plug it back in.
If the Start light is still flashing:
The scanner may be malfunctioning.
The scanner lamp may need to be replaced.
The connected optional equipment may be malfunctioning.
Start light flashes red. This indicates one of the following problems: